RE-301 rotary evaporator is a kind of mini rotary evaporator ,Rotary evaporators are distillation units that incorporate an efficient condenser with a rotary flask system. As the flask containing the solvent is rotated it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation that is effected by heating from the accessory water or oil bath . It is one of the necessary basic instruments in the chemical industry, pharmaceutical industry, universities and research laboratories and other units etc.
RE-301 rotary evaporator features:

1. Quick and easy lifting mechanism.

2. The evaporator can be tilted horizontally in the range of 0-45°.

3. High evaporation rate of the vertical condensation system.

4. PTFE evaporating pipe, good sealing and heat-resisting. Joint part is sealed Fluorine rubber mat which brings good performance.

5. Automatic temperature control digital display.

Temperature digital display and control by pt100 sensor. when the pre-selected temperature is reached the temperature you setted, the controller automatically will turn off the heater supply, When it is lower than the pre-selected temperature, controller will switch on automatically to realize constant temperature.

6. GG-17 high borosilicate glass evaporating flask and receiving flask.

The flasks are made of GG-17 high borosilicate glass which is blowed by hand. Their intensity, concentricity, glossiness, and surface finish are better than rough flasks.

7. 110 V/60HZ can be customized.

Model	RE-301
Rotating Flask（L）	3
Collection Flask（L）	2
Rotating Motor（W）	40
Rotating（R/min）	0-120
Water（Oil）Bath Power（W）	1500
Temp Control Mode/Range（℃）	RT-399
Temp Resolution（℃）	±1
Evaporation Rate（L/H2O）	≥1.5
Max Vacuum Degree	＜133pa
Lifting Height(mm)	0-120
Water Bath Size(mm)	Φ26*15
Condenser	Vertical with charge pipe，Large Condenser，evaporating pipe
Lifting Mode	Water/oil bath Manual Lifting
Voltage	220V/50HZ
Sealing Mode	PTFE，fluoro rubber sealing